"I had such a wonderful experience with this company and their performance at my home. They did such a fantastic job and…"
Spencer Flynn

Decks and docks on the First Coast take a beating from UV, salt drift, humidity, and pop-up thunderstorms, and the wood needs regular staining to survive. Our crews clean, prep, and stain wood surfaces from Neptune Beach and Atlantic Beach out to Green Cove Springs and Middleburg.

We inspect your First Coast deck for structural issues, loose boards, UV damage, and surface condition to determine the best staining approach for your wood type, cedar, pine, or composite.
Deck Inspection. We inspect your First Coast deck for structural issues, loose boards, UV damage, and surface condition to determine the best staining approach for your wood type, cedar, pine, or composite.

We power-wash the deck surface, sand rough or splintered areas, and apply premium penetrating deck stain with brushes and rollers for deep wood protection against The First Coast's intense UV and moisture.
Clean, Sand & Stain. We power-wash the deck surface, sand rough or splintered areas, and apply premium penetrating deck stain with brushes and rollers for deep wood protection against The First Coast's intense UV and moisture.

We walk the completed deck staining with you, check for even coverage and penetration, and provide maintenance tips to extend the life of your stain in Central Florida weather.
Final Inspection. We walk the completed deck staining with you, check for even coverage and penetration, and provide maintenance tips to extend the life of your stain in Central Florida weather.
We inspect your First Coast deck for structural issues, loose boards, UV damage, and surface condition to determine the best staining approach for your wood type, cedar, pine, or composite.
We power-wash the deck surface, sand rough or splintered areas, and apply premium penetrating deck stain with brushes and rollers for deep wood protection against The First Coast's intense UV and moisture.
We walk the completed deck staining with you, check for even coverage and penetration, and provide maintenance tips to extend the life of your stain in Central Florida weather.
Number of Territories
0+
Number of Paint Jobs
0+
5-Star Reviews5-Star
Reviews5 Star Reviews
0+
"I had such a wonderful experience with this company and their performance at my home. They did such a fantastic job and…"
Spencer Flynn
"Excellent painting service. Andrés López was very professional from the first contact, meeting deadlines and delivering…"
Viviana Torres
"I had a great experience with this painting company especially with Andres. He was an excellent person from start to fin…"
Yamilet López
"Can't say enough about the job Junior and Fernanda did on our interior and outside stucco. They were attentive to detail…"
Brian Wheelis
Average ROI on wood deck improvements
Zonda Cost vs. Value, 2024
Maximum added resale value
Angi
How often an untreated wood deck needs retreatment
industry standard
Trusted Paint Partners
A well-stained deck can outlast an unsealed one by a decade. Here is what to know about deck staining on the First Coast.
We spec penetrating oil-based and premium hybrid stains from Sherwin-Williams SuperDeck, Benjamin Moore Arborcoat, and Cabot for most deck-staining projects on the First Coast. Semi-transparent finishes are the best long-term balance of color, protection, and grain visibility. On the First Coast, deck prep is a serious step, not a wave-of-a-wand pressure wash. Our crews clean the deck with a wood cleaner sized for the level of mildew, tannin bleed, and prior finish present, then apply a wood brightener that neutralizes the cleaner and reopens the grain for absorption. Every deck project starts with a free in-home estimate where our project manager measures square footage, notes wood species, and documents needed repairs. We deliver a written scope covering cleaning, brightening, board replacement, stain product, and application method.
Solid stains provide the longest color life and best UV protection but hide grain and can peel if the substrate is damp. Transparent stains show off wood grain beautifully but sacrifice UV protection in the Northeast Florida sun. We match product to your goals and to the wood species during the estimate. We allow the wood to fully dry before staining, usually two to three days in dry weather, longer in humid stretches. Staining wet wood is one of the most common failure modes in Florida, and we do not skip that dry window. On the job we protect landscaping, prep the wood, allow it to dry, and apply stain by brush and pad or spray-and-back-brush depending on the deck. A final walkthrough confirms coverage, and the 3-year transferable warranty documents workmanship.
Walk every board and check for soft or spongy sections, popped fasteners, splintered edges, and mildew streaks. Beach-community decks in Jacksonville Beach, Atlantic Beach, and Neptune Beach also see fastener corrosion from salt drift, and dock boards see harsher exposure yet. UV is intense in Northeast Florida, and it destroys unprotected wood fiber over a summer or two. Salt drift, humidity, and pop-up thunderstorms compound the damage. That is why the right stain, applied on sound, dry wood, is one of the highest-return maintenance moves on a First Coast home.
We replace failing boards, reset fasteners, and address rot before staining so the new finish is going onto sound wood. Boards that no longer bead water are ready for prep and refinish. Homes closer to the Atlantic see harsher conditions than inland Green Cove Springs or Middleburg, and we tailor product choice accordingly.

Your peace of mind, at the top of mind with our three-year transferable warranty. Covers the painting job, even if you sell the house.
Download WarrantyHow often should I stain a deck on the First Coast?
Most decks in Northeast Florida need a fresh stain every 2 to 4 years depending on sun exposure, wood species, and whether you used a transparent, semi-transparent, or solid finish. Docks and decks right on the water may need staining sooner, and shaded decks in mature-tree neighborhoods can go a little longer. Waiting past the point where water stops beading is usually waiting too long.
Which deck stain type works best in the humid Jacksonville climate?
Semi-transparent penetrating oil-based stains and premium waterborne hybrids like Sherwin-Williams SuperDeck and Benjamin Moore Arborcoat are the workhorses on the First Coast, because they let the wood breathe while blocking UV. Solid stains give the longest color life but hide grain and can peel if the wood is not fully dry when applied. Transparent stains look beautiful the first year but wear fast in Florida sun.
Do you strip old stain off my deck before restaining?
When needed, yes, we clean and prep every deck so the new stain penetrates evenly. That may mean pressure washing at the right pressure to open the grain, applying a wood brightener to remove mildew and tannin bleed, and sanding failing solid-stain areas. Our deck crews on the First Coast pick the least aggressive prep that still delivers a clean, absorbent surface.
Can you stain a deck that has already grayed?
Yes, weathered gray wood is essentially UV-damaged fiber on the surface, and we can restore it by cleaning off the gray layer and reopening the grain with a wood brightener. From there we stain with a semi-transparent or solid product depending on how uniform you want the color. Homes in older Jacksonville Beach and Atlantic Beach neighborhoods routinely see this kind of restoration during our free estimate.
What should I look for on my deck before staining?
Check for soft or spongy boards, loose fasteners or popped nails, split or splintered edges, mildew streaks, and areas where water no longer beads. Salt-air homes on the First Coast also see more corrosion around nails and screws, and near-water docks can have marine-grade issues that require different products. We flag any wood that needs replacement during the estimate so the finish is going onto sound material.
When is the best time to stain a deck in Northeast Florida?
Dry stretches in late fall, winter, and early spring are the sweet spot on the First Coast, when humidity is lower and afternoon storms are rare. We can absolutely stain in summer, we just plan around rain and give the wood time to dry after pressure washing. Our crews check the forecast daily and adjust rather than staining onto a wet substrate.
Expert tips, how-to guides, and inspiration for your next deck staining project.
Swipe to explore →

The First Coast's intense UV and rain mean most decks need re-staining every 2–3 years for optimal protection.
Read More →
Stain preserves wood grain and is easier to maintain. Paint offers more color options but can peel.
Read More →
Natural wood tones and warm grays dominate The First Coast's outdoor living spaces this year.
Read More →