"I had such a wonderful experience with this company and their performance at my home. They did such a fantastic job and…"
Spencer Flynn

Salt air, humidity, and dense tree canopies mean mildew, algae, and grime settle onto First Coast homes constantly. Pressure washing is both a cleaning service and a prep step for painting and staining projects.

We identify the exterior surfaces to be cleaned, siding, brick, concrete, driveways, patios, and fencing, select the right pressure settings for each material, and protect landscaping and fixtures.
Surface Assessment. We identify the exterior surfaces to be cleaned, siding, brick, concrete, driveways, patios, and fencing, select the right pressure settings for each material, and protect landscaping and fixtures.

We use commercial-grade pressure washers with surface-appropriate PSI, soft wash for painted siding and stucco, high-pressure for concrete driveways and walkways, removing years of First Coast mold, mildew, and grime.
Wash & Clean. We use commercial-grade pressure washers with surface-appropriate PSI, soft wash for painted siding and stucco, high-pressure for concrete driveways and walkways, removing years of First Coast mold, mildew, and grime.

We walk all cleaned surfaces with you, verify thorough cleaning without surface damage, and recommend any follow-up sealing, staining, or painting for long-term protection of your First Coast property.
Inspect & Protect. We walk all cleaned surfaces with you, verify thorough cleaning without surface damage, and recommend any follow-up sealing, staining, or painting for long-term protection of your First Coast property.
We identify the exterior surfaces to be cleaned, siding, brick, concrete, driveways, patios, and fencing, select the right pressure settings for each material, and protect landscaping and fixtures.
We use commercial-grade pressure washers with surface-appropriate PSI, soft wash for painted siding and stucco, high-pressure for concrete driveways and walkways, removing years of First Coast mold, mildew, and grime.
We walk all cleaned surfaces with you, verify thorough cleaning without surface damage, and recommend any follow-up sealing, staining, or painting for long-term protection of your First Coast property.
Number of Territories
0+
Number of Paint Jobs
0+
5-Star Reviews5-Star
Reviews5 Star Reviews
0+
"I had such a wonderful experience with this company and their performance at my home. They did such a fantastic job and…"
Spencer Flynn
"Excellent painting service. Andrés López was very professional from the first contact, meeting deadlines and delivering…"
Viviana Torres
"I had a great experience with this painting company especially with Andres. He was an excellent person from start to fin…"
Yamilet López
"Can't say enough about the job Junior and Fernanda did on our interior and outside stucco. They were attentive to detail…"
Brian Wheelis
Maximum added home sale price from exterior cleaning
NAR
More that high curb-appeal homes sell for
NAR
Cited maximum ROI on professional exterior cleaning
industry data
Trusted Paint Partners
Not every surface wants the same pressure or the same cleaner. Here is what to know about pressure washing on the First Coast.
High-pressure washing has its place, driveways, concrete walkways, and heavy-buildup vinyl siding, but stucco, block, brick, wood, Hardie, and roofs typically want soft-washing, which is low pressure plus a cleaning solution that does the real work. Our crews adjust pressure, nozzle, and stand-off distance for every surface. On the First Coast, pressure washing (or soft washing) is essentially step one of every exterior painting, brick painting, deck staining, and fence staining project. It removes the chalk, mildew, and grime that would otherwise prevent the new finish from bonding. Every pressure-washing project starts with a free walkthrough where our crew measures square footage, notes surfaces, and identifies any items that need extra care. We deliver a written scope so the price is agreed upfront.
That is especially important on older masonry and painted brick in Riverside, Avondale, San Marco, and historic downtown Jacksonville, where too much pressure can damage mortar or drive water into a wall. We allow adequate dry time between washing and coating, and we schedule pressure washing early enough that the substrate is fully dry when the coating goes on. On the job we mask, protect landscaping, wash with the right pressure and cleaner for each surface, and rinse thoroughly. A final walkthrough confirms results.
Walk the exterior and note mildew streaks, chalking paint, spider webbing, salt residue near the Beaches, and any obvious loose paint or caulk. Loose paint should be scraped rather than blasted off, and failing caulk should be replaced. Humidity, dense tree canopies, and salt drift make mildew and algae the dominant challenge for homes on the First Coast. Homes on the shaded north side or under mature oaks in Riverside, Avondale, San Marco, Ponte Vedra, and older Beaches neighborhoods routinely see heavy mildew.
Check for landscaping and outdoor items that need to be moved or covered. Our crews protect plants, outdoor furniture, and outlets as part of the setup. Beach-adjacent homes accumulate salt residue, and pool decks and lanais see algae and hard-water stains. We tune the cleaning solution and technique to the actual conditions.

Your peace of mind, at the top of mind with our three-year transferable warranty. Covers the painting job, even if you sell the house.
Download WarrantyWhy does my Florida home get so much mildew and algae?
Northeast Florida humidity, dense tree canopies, and warm temperatures year-round create ideal conditions for mildew and algae to grow on siding, walkways, roofs, and fences. Homes on the north side or under mature oaks see it worst. Our pressure-washing crews on the First Coast wash it off and, when needed, apply a mildewcide to slow regrowth.
Is pressure washing safe for stucco and block on the First Coast?
Yes, when the pressure and technique are matched to the surface. Our crews adjust pressure, nozzle, and stand-off distance for stucco, block, brick, wood siding, Hardie, and vinyl so we clean effectively without eroding mortar or driving water into the wall. Soft-washing (low pressure plus cleaning agents) is often the right call for older masonry.
Can you pressure wash roofs on First Coast homes?
For asphalt and tile roofs we typically soft-wash rather than high-pressure wash, applying a specialized cleaning solution that kills algae and rinses at low pressure. High pressure can damage granules on asphalt shingles and force water under tile. Our crews on the First Coast use the right method for the roof type.
Do you clean driveways, walkways, and pool decks?
Yes, driveways, walkways, and pool decks are among our most common pressure-washing scopes on the First Coast. Concrete, pavers, and travertine all handle pressure washing well with the right technique and cleaner. We can also apply a sealer after cleaning on request.
Should I pressure wash before painting or staining?
Absolutely, pressure washing (or soft washing) is the first step of any exterior painting, brick painting, deck staining, or fence staining project on the First Coast. It removes mildew, chalking, and dirt so the new finish bonds to a clean substrate. Skipping it is one of the top reasons paint jobs fail in Northeast Florida.
How often should I have my home pressure washed?
Most homes on the First Coast benefit from a full exterior wash once a year, more often on the north side of the house, near mature trees, or in beach communities where salt residue accumulates. Driveways and walkways may need cleaning twice a year in high-traffic areas.
Expert tips, how-to guides, and inspiration for your next pressure washing project.
Swipe to explore →

Clean surfaces are essential for paint adhesion. Skipping pressure washing is the #1 cause of premature paint failure.
Read More →
Soft washing uses low pressure and cleaning solutions for delicate surfaces like painted siding and stucco.
Read More →
First Coast homes benefit from annual pressure washing to prevent mold, mildew, and dirt buildup.
Read More →