Cabinet Painting in Northern Kentucky

Cabinet refinishing is the single highest-impact interior project across Fort Mitchell, Edgewood, and Union. Kitchens that reach out are usually one of two houses: a 1980s or 1990s Edgewood, Fort Wright, or Cold Spring build with honey oak that has read dated since roughly 2015, or a newer Union or Hebron kitchen with builder-grade maple that never suited the client. Both refinish beautifully, but oak needs its heavy grain filled if the client wants a truly smooth face, and maple needs a stain-blocking primer. Our writeup on the best paint for cabinets walks through the coatings we actually use.

Two-tone kitchens dominate the requests we see across Union, Hebron, and Independence: warm off-white perimeters paired with a saturated island in deep navy, forest green, or warm charcoal. Covington and Fort Thomas remodels lean into layered heritage tones with brushed brass or matte black hardware. The finish schedule is built for a sprayed, hand-leveled result on doors and drawer fronts, with brush-and-roll only where a spray simply cannot go without masking the whole house.

Northern Kentucky kitchens work hard through humid summers and long heating-season winters, and long furnace cycles push grease onto cabinet fronts long before the finish itself fails. Crews degrease with a real cleaner, sand for adhesion, and use a cabinet-grade waterborne alkyd that cures hard enough that soap and a rag do not lift color months later. Cabinet work sequences cleanly with any interior painting already on the scope, and exposed soffit drywall can fold in drywall repair.