Cabinet Painting in Central Iowa

Cabinet refinishing is the single highest-impact interior project across Des Moines and West Des Moines. Kitchens that reach out are usually one of two houses: a 1980s or 1990s Urbandale or Windsor Heights build with honey oak that has read dated since roughly 2015, or an Ankeny or Waukee kitchen with builder-grade maple that never suited the client. Both refinish beautifully, but oak needs its heavy grain filled if the client wants a truly smooth face, and maple needs a stain-blocking primer. Our writeup on the best paint for cabinets walks through the coatings we actually use.

Two-tone kitchens dominate the requests we see across Ankeny, Waukee, and Johnston: warm off-white perimeters paired with a saturated island in deep navy, forest green, or warm charcoal. Sherman Hill and Beaverdale remodels lean into layered heritage tones with brushed brass or matte black hardware. The finish schedule is built for a sprayed, hand-leveled result on doors and drawer fronts, with brush-and-roll only where a spray simply cannot go without masking the whole house.

Central Iowa kitchens work hard through humid summers and heating-season winters, and long AC and furnace cycles push grease onto cabinet fronts long before the finish itself fails. Crews degrease with a real cleaner, sand for adhesion, and use a cabinet-grade waterborne alkyd that cures hard enough that soap and a rag do not lift color months later. Cabinet work sequences cleanly with any interior painting already on the scope, and exposed soffit drywall can fold in drywall repair.